INSTALLATION

Bricks & Stones

Make a dividing line where the ceramic will be attached

Apply the mixture behind the ceramic to exceed 80% of the surface with a small knife

Add the sealant to the triangular plastic

Apply adhesive between the tiles at a distance of 6mm. Use 8mm steel to tidy it up

Use a small tap to scrub the sealant attached to the ceramic and clean it with a sponge

Wood

Apply the dough behind the ceramic to exceed 80% of the surface with toothed raskam

Stick wood on the wall

Press the ceramic attached to the wall using raskam

Use a small tap to rub the sealant attached to the ceramic, and clean it with a sponge

Leather

Apply the dough behind the ceramic to exceed 80% of the surface with toothed raskam

Apply adhesive, you can also give shiny aluminum anti-rust to give the distance between the ceramics

Press the ceramic attached to the wall using raskam

Use the cutter to remove the shiny aluminum layer and clean the ceramic with a sponge